Classic Sign Frame for Commercial Sized Signs

If you need to use a larger sized sign (over 36” wide or 36" high) to market your property, building or office, we will build a frame to fit your needs. To install these larger sized frames, you have two easy options:

1. For temporary use, we recommend using two of the 4 foot green metal stake which you can purchase at any hardware store.

2. For a more permanent installation, you can can dig a hole and bury the posts (see below to order longer posts).

*Note: Our frames will accommodate signs up to 4 feet wide and 4 feet high. They will hold sign material which is up to 3/8” thick. Using heavy plywood or other heavy material as your sign backing is not recommended with our frames because of the excess weight. All frames ordered on this page will come with 6 foot tall posts unless noted below.

Watch Installation Video

ordering

1. Frames- Enter the quantity of frames you would like to order

2. Cap Style-Enter the quantity and type of post cap you would like on your frame (2 caps per frame). If you are ordering multiple frames, simply enter the quantity of each cap you desire. If no cap style is entered, we will automatically make your frame with the ball cap.

3. Measurements - Your frame will be custom made, so please measure carefully:(round to the nearest inch)

This extra 24" is needed if you wish to bury these posts for more permanent installation. $10 will be added to the frame price for these longer posts.

Top Riders: Our post caps have been designed to hold up to 2 additional riders. No screws or tools are needed. If the width of your top rider sign is less than the width of your main sign (i.e. your main sign is 30” wide but your riders are only 24” wide), you will need to order one of our rider stabilizer in our Accessories Section.

4. Bottom Rider Hooks:

If you like us to add 2 rider hooks to the bottom horizontal support of your frame so you can hang a bottom rider, please check this box.